Memorandum of Understanding signed between Space Applications Centre, ISRO, and Bharat Electronics Limited...
BEL pays Rs. 49.21 cr Interim Dividend to Govt...
BEL’s beautification drive to ease traffic woes at BEL Circle: BEL constructs new bus shelters, signals, toilets, footpath near BEL Circle...
BEL launches Next Gen communication Radio set ...
BEL launches BELCOMNET communication network ...
BEL launches Remote Controlled Weapon Station for MBT Arjun Mk II...
New Director (HR) takes charge at BEL...
BEL organises national level seminar on “Role of Startups in Defence”, in association with HAL & BEML Ltd, Bengaluru...
All donations towards Prime Minister's National Relief fund (PMNRF) are notified
for 100% deduction from taxable income under Section 80G of the Income Tax Act,
MSK Demodulator AQ 6412 is as an Add-on Equipment for VLF-HF Receiver EK 896 to facilitate MSK mode of VLF reception, compatible to VLF receiver VS-430. The MSK Demodulator is interfaced to EK 896 at IF level and it demodulates MSK modulated signal in various modes.
The LHP 265 is an advanced DSP based lightweight 20 W HF SSB manpack radio. It provides a complete solution to the short range communication requirements in the crowded HF band.
The LHP 265 provides Voice, Data, Telegraphy and Flash message communication. Communication reliability is improved by means of Automatic link establishment (BEST CALL), which enable real-time selection of optimum channel frequency. For reliable transmission of critical under EW condition, the radio provides digital secure transmission.
The radio can be used with wide range of antennas,including a lightweight foldable whip for portable operation, dipole, long wire and many other antennas for static operation.
It provides a complete solution to the medium and longrange communication requirements in the crowed HFband.
It provides Voice, Data, Telegraphy and Flashmessage communication. Communication reliabilityis improved by means of BEST CALL (Automatic linkestablishment), which enable real-time selection ofoptimum channel frequency. For reliable transmission ofcritical information under EW condition, the radio provides securetransmission and anti-jamming protection by means offrequency hopping.
The radio can be used with wide range of antennas,including a whip, dipole, long wire and many otherantennas for static operation.
LVP 285 is a VHF Handheld Radio with in-built High Grade Digital Secrecy. The Radio Set is State of the Art design, compact and light weight. Interface is provided for Hand set / Headgear and Crypto key loading.
The operator interface is user friendly with minimum number of controls. The Radio Set is provided with various types of antennae for use in different types of Terrains, Ranges and Roles. The Radio Set has in-built Mic and Speaker. A light weight Carrying Pouch enables the operator to carry the Radio Set with ease. A detachable Belt Clip is also provided with the set.
CONFIGURABLE TACTICAL RADIO-VHF FH (BHARATI) is new generation Software Frequency Hopping Radio. It is a lightweight, compact design, high performance VOICE and DATA communication equipment for Manpack and Mobile role.
The design is based on the Digital Signal Processor (DSP), Direct Digital Frequency Synthesiser (DDFS) and High-end Micro controller (ARM). The Radio works in Anti - Jam and Fixed Frequency mode with Built-in High-grade Digital Secrecy. The Radio has Built-in GPS and is available in 5 Watt and 25 / 50 Watt output (with add-on Power Amplifier) versions.
STARS V Mk II 5 W radio is a frequency hopping radio in the family of Secure Tactical Radio system VHF (Stars V) developed to meet the requirements of tactical VHF radio communication needs protected against electronic counter measures. It provides all modern features required to meet the opeational needs in the Forward Edge Battle Area (FEBA) today. Some of the important features are built-in high grade crypto, secure selective call, buit in GPS with grid display, built-in data modem, TOD based reliable synchronisation under severe jamming, orthogonal hopping & hailing etc.
The radios are programmable for the hop sets and secure keys.The controls and settings of the radio is so designed that this complex ECCM radio is very user friendly.
A host of accessories such as manpack carrying harness, battery packs to suit any type of climatic conditions, battery chargers including solar charger for stand-alone charging and variety of antennas suitable for manpack , truck/ground, GPA roles of operation are provided.
VHF Transreceiver – AFV Radio is a software controlled Frequency Hopping Radio in the frequency band of 30-88 MHz. The design of the Radio is based on Digital Signal Processor (DSP) and Direct Digital Frequency Synthesis (DDFS). The Radio works in Anti-jam Frequency Hopping and Fixed Frequency modes with built-in High Grade Digital Secrecy. The radio support both Voice and Data communication. The Radio is specially designed for fitment in Armored Fighter Vehicles like T-72 tanks, BMP's and Truck/ Ground Role.This Radio Set is Compatible with STARS-V Mk-I for Voice and Mk-II for Voice & Data Communication Mode.
STARS V Mk II 25 W radio is a frequency hopping high power manpack radio in the family of Secure Tactical Radio System VHF (STARS V) developed to meet the requirements of long range VHF radio communication needs protected against electronic counter measures. It provides all the modern features required to meet the operational needs in the Forward Edge Battle Area (FEBA) today. Some of the important features are built-in high grade crypto, secure selective call, built-in GPS with grid display, built-in data modem, TOD based reliable synchronisation under severe jamming, Orthogonal hopping & hailing etc.
The radios are programmable for the hop sets and secure keys. The controls and settings of the radio is so designed that the complex ECCM radio is very user friendly.
A host of accessories such as manpack carrying harness, battery packs to suit any type of climatic conditions, battery chargers including solar charger for stand-alone charging, variety of antennas suitable for manpack, truck/ground, GPA roles of operation are provided.
The VHF base station is state-of-the-art design, compact and lightweight. It is Microprocessor based, inter-works with LVP 285 handheld radio. It enhances the utility of the handheld radio by increasing its communication range. All the other features are same as those of LVP 285 handheld Radios.
LVS 297 is a VHF Repeater station with state-of-the-art design. Two Base station (LVM 294) as dedicated Transmitter & Receiver are configured as a Repeater. It is Microprocessor based, inter-works with LVP 285 handheld radio. It enhances the utility of the handheld radio by increasing its communication range. All the other features are same as those of LVP 285 handheld Radios.
LUP 291 is a UHF Handheld Radio with built-in High Grade Digital Secrecy. The Radio Set is State-of-the Art design, compact and light weight. Interface is provided for Hand set / Headgear and Crypto key loading.
The operator interface is user friendly with minimum number of controls. The Radio Set is provided with various types of antennae for use in different types of terrains, ranges and roles. The Radio Set has in-built Mic and Speaker. A light weight Carrying Pouch enables the operator to carry the set with ease. A detachable Belt Clip is also provided with the Radio Set
The UHF base station is state-of-the-art design, compact and lightweight. It is Microprocessor based, inter-works with LUP 291 Handheld radio. It enhances the utility of the Handheld radio by increasing its communication range. All the other features are same as those of LUP 291 Handheld Radios.
LUS 296 is a UHF Repeater station with state-of-the-art design.Two Base station (LUM 295) as dedicated Transmitter & Receiver are configured as a Repeater. It is Microprocessor based, inter-works with LUP 291 handheld radio. It enhances the utility of the handheld radio by increasing its communication range. All the other features are same as those of LUP 291 handheld Radios.
The Radio Set LUP 322 is a fully solid-state, light weight, high performance V/UHF transreceiver designed for ground-to-ground and ground-to-air communications. It thoroughly complies with existing VHF, UHF and V/UHF transreceiver standards.
The transreceiver covers the VHF band of 100 to 156 MHz and UHF band of 225 to 400 MHz in 25 kHz channel spacing. It provides 2 way AM simplex communication. The transmitter output power is 5 Watts (CW) with provision for reduced output levels.
16 channels can be field programmed into memory bank A and 16 other channels into memory bank B. A push to read switch will illuminate the LED display. To prevent unauthorized corruption of pre-programmed frequencies, a switch is provided.
The pre-programmed channels can be recalled but unauthorized re-programming is prevented. The radio set operates from 24 V Ni-cad battery. The radio may also be connected to an external 24 V DC source such as vehicle battery. An AC power supply is available as an option for fixed-site operation using either 110 V or 220 V AC supplies.
The accessories provided with the Radio Set enables it to be deployed as Manpack Radio, Vehicular Radio, Fixed / Static Installation and Radio Rebroadcast Installation for extended range operations
V/UHF AM/FM Transreceiver is developed to meet the required long range ground to ground, and ground to air communication needs with protection against Electronic Counter Measure (ECM).
The radio is provided with high-grade crypto, frequency hopping, voice/data.
The radio is inter operable with Airborne INCOM series radio in secure and ECCM mode.
The communication in ECCM mode is instantaneous as Time Of the Day (TOD) is maintained using highly stable clock.
Featured with a Guard receiver in the UHF band.
High Data rate IP radio customized for vehicular application mounted in 19” Rack. The radio is designed for ground to groundcommunication needs with protection against Electronic Counter Measures (ECM). The radio is provided with crypto frequency hopping.
The SDR Manpack radio is compact V/UHF band radio designed to provide fast, releiable and secure LOS voice, data and video communucation. It has advance high data rate upto 1Mbps. It is power efficient and light weight suitable for manpack application.
UHF handheld trans-receiver is developed to meet the required short range ground to ground, ground to ship and ship to ship communication needs with protection against Electronic Counter Measures (ECM).
The Satcom Messaging Terminal is a compact hand-held communication system capable of providing secure location reporting, navigation, short messaging and Distress Communications using the Mobile Satellite Service (MSS) transponder of Indian satellite( GSAT-6). The battery operated system can be deployed in less than a minute, making it highly suitable for defence forces.
The Manpack Satcom Terminal is a compact communication system capable of providing secure voice/data communication using the Mobile Satellite Service (MSS) transponder of Indian satellite( GSAT-6).
The battery operated system can be deployed in less than a minute, making it highly suitable for providing rapid communication during mountain and jungle warfare, low intensity conflicts and disaster management.
The Handheld Satcom Terminal is a compact handheld communication system capable of providing secure voice/data communication using the Mobile Satellite Service (MSS) transponder of Indian satellite(GSAT-6).
The battery operated system can be deployed in less than a minute, making it highly suitable for defence forces.
UHF Radio Relay is a digital communication equipment that provides fast, reliable and secure communication links for military applications. It can operate in a fixed frequency mode or in two different hopping modes; conventional and adaptive. The transmission security in the network is increased considerably by the use of frequency hopping techniques.
The radio is provided with ECM protection. To avoid interference from / to other communication equipment, up to 20 sub-bands can be programmed as forbidden bands. The conventional and adaptive modes of frequency hopping may be combined with high, low, manual control power modes. The transmission thus achieved is highly resistant to high-power pulsed jamming and immune to partial band jamming.
The radio has two special test functions; BITE and LOOP tests. The BITE (Built-in Test Equipment) is a function that continuously monitors levels and values at critical test points. The operator uses the LOOP test to check functions of the equipment.
Point to Point radio works in the microwave frequency range. It is full duplex communication equipment, designed to operate as a multi-channel radio through line-of-sight radio path, for military use. Various kinds of data interface is provided viz. E1( upto n=16), E3, V.35 and LAN which is available on Line Termination Box (LTB), that would be connected to IDU. The radio is provided with an Engineering Order Wire (EOW) service. The equipment is modular in construction for ease of maintenance and repair. The radio comprise of two units viz. In Door Unit (IDU) and Out Door Unit (ODU).The IDU is 19 inches rack mountable, modular in construction and designed for shelter based tactical applications. ODU is mast mounted and of rugged design.
The equipment can operate both in Fixed Frequency (FF) mode and in Frequency Hopping (FH) mode. In FH mode, hop rate is 600 hops/sec for user data rate of 2Mbps and 8Mbps. The radio power output can be set in one of the three modes: Low Power (LOW) mode or High power (HIGH) mode or Automatic (AUTO) power mode. The equipment is designed to operate from a 230V AC supply with automatic transfer to a 24V DC supply in the event of mains failure using FCBC unit.
This Radio designed to provide Point to Point and Point to Multi Point voice and communication. The radio can be configured as either Base station or remote station.
Base station is capable of communicating with upto six remote stations. Base station makes use of beam switching antenna (BSA) and remote station uses parabolic reflector antenna (PRA) to provide reliable communication.
Radio is realized in two unitsi.e Indoor Unit (IDU) and outdoor unit (ODU).
VHF Transreceiver – AFV Radio is a Software Controlled Frequency Hopping Radio in the frequency band of 30-88 MHz. The design of the Radio is based on Digital Signal Processor (DSP) and Direct Digital Frequency Synthesis (DDFS). The Radio works in Anti- jam Frequency Hopping and Fixed Frequency modes with built-in High Grade Digital Secrecy. The Radio support both Voice and Data communication. The Radio is specially designed for fitment in Armored Fighter Vehicles like T-72 tanks, BMP's and Truck/ Ground Role.
This Radio Set is Compatible with STARS-V MK-I and MK-II in FF Secure, FH1 & FH2
Digital Inter Communication System is a state of art equipment meant for intercommunication of crew members of Armoured fighting vehicles. It can provide interface support for accessing of radio sets by many crew members at the same time. It also supports for exchanging of digital data files from one crew member to other crew member through serial link. Data communication with other vehicles over Radio sets is also possible.
The basic system components are
The operation of the Digital Intercom System (DIS) is controlled from the Central Unit (CU) whereas all the Crewmember units (CMU) provide user interface functionality. CMU's work as User terminals and all the functions and features of voice and data connections, selecting the requested operator. The requested party receives a call by an indication on the CMU. The called person can reject or accept the call. If the call is accepted the system automatically establishes a connection between the parties and simultaneously removes them from the "INTERCOM" conference. When the call is rejected the calling party will be informed by a red LED on the CMU.
Tank Intercom System, R-174 Mk-II, is meant for Intercommunication between crew members of a Tank. This can also be used for communication between the crew member of a tank with the crew member of other Tank through Radio. The system is designed for compatibility with Radio Sets R-173, CNR, STARS-V and TADIRAN.
Semi-Ruggedised Automatic Exchange (SRAX MK II) Equipment is an Automatic Telephone exchange.
Designed to meet the communication requirement of an Army unit/ formation. The equipment supports 512 ports consisting of POTS,ISDN and Trunks in its base unit. The capacity can be expanded by 600 ports using Expansion unit.
It is based on digital stored program control technology with time switching concept and is completely non-blocking.
This exchange is having latest features like ISDN ports and E1 trunks. It supports 240 subscriber ports out of which 64 ports can be configured for POTS, LD, RD & CO. Remaining ports can be used as POTS. This also has 30 ISDN ports.
In addition to above, all critical elements of the eqpt such as switching matrix, control processor are duplicated to provide redundancy. Also distributed power supply schemes is used. Modular concept has been used for ease of maintenance and system capacity enhancement.
For Man Machine Interface (MMI), a laptop PC with Win NT operating system(OS) is used. Besides MMI, Operator Console wit LCD displays are also provided.
The SRAX MK II is portable and designed for vehicle mounting.
Unit Level Switch board MK-III(ULSB MK-III) is a state-of-the-art automatic telephone exchange designed to meet the communication requirements of Army at unit level.
It is based on digital stored program control technology with Time Switching concept and is completely non-blocking
This exchange is having latest features like ISDN ports and E1 trunks. It supports 24 POTS, 08 Magneto, 08 ISDN subscriber ports. It has connectivity to other Switches and networks (ASCON, AREN) through Analogue Trunks viz. LD/ E&M and CO and digital trunks E1 (QSIG and CAS MFR2). It works both as Local and Transit Exchange. A Keyboard, LCD display and Head Set is provided as User friendly Operator Console to handle various operator features. A LAN port is provided to connect a Laptop PC(with Windows) to work as MMI for system administration.
For high system reliability all critical elements of the eqpt such as matrix, control processors are duplicated to produce redundancy. Also distributed power supply scheme is used. Modular concept has been used for ease of maintenance and system capacity enhancement.
The ULSB MK III is man portable and designed for vehicle mounting.
The MSS Network consists of Briefcase Terminals and MSS Hub which provides central control for the Briefcase terminals operating in SCPC DAMA mode. It allocates the resources to the terminals on demand. The network supports voice & data and can be integrated to the existing networks through EPABX (E1, IP or PSTN lines)
The deployment overview of the satellite Network consists of NCMS & briefcase terminals. NMS is meant for secure VSAT network that will be configured for Star topology. It follows an architecture that makes it independent of frequency bands. Overall network security is of prime concern. Its design is on the assumption that majority of the traffic will be thin route following Poisson distribution. This traffic distribution is best served by the circuit switched network and therefore, SCPC DAMA philosophy has been adopted.NMS system uses Frequency Division Multiple Access (FDMA) for multiple traffic channels and Slotted Aloha for Resource Reservation. This scheme gives fairly good advantage in terms of satellite bandwidth utilization over the pre-assigned connectivity.
Multi Layer Communication System referred as DMRR / MCT when deployed in the tactical defence network will provide last mile access connectivity to remote subscriber over radio/satcom/fiberlink via NLDSP point of presence.
The Network of Transportable Static/ Mobile Terminal provides communication media for transfer of fail-safe, error free, secured voice, video and real time data in point-to-point / point-to-multipoint mode from any location to any location.
The Tactical access switch is meant to provide local/trunk switching based on IP/IMPLS technology and cater for Voice, data including video as well as aggregation and switching facility for traditional TDM voice switches. A high-end Indigenous IP/MPLS router providing necessary WAN & LAN interfaces on a high throughput & highly available platform is at the core of the TAS solution.
IP Gateway Exchange (IPGX) provides mission critical local and gateway voice services. It provides Gateway connectivity from TCS to other networks /systems such as ASCON, AREN, CNR, E1 based switches. System is Compact and Ruggedized for field deployments.
AISDN (ATM based Integrated Shipboard Data Network) is a multi-services shipboard network designed to converge all voice traffic, real time video and traditional data communications onto a single broadband infrastructure. It is a triple redundant, flexible, reliable and modular network supporting multiple services for Naval ships. It integrates various equipment and systems on board namely Radars, Sonars, Fire Control Systems, EW Systems, CAIO (Computer Aided Information Organization), and a number of other equipment for Ship's Household Data(SHHD).
LINKII MODIII System with features like Multi-band, Multi-class, Multi-mode, high data rate links through high bandwidth captive radios, also referred as Indian Naval Data Link – INDL for P-15A, P-28 and P71 class of ships. This system was designed to have seamless integration with CMS interface
The Composite Communication System, CCS Mk II is an integrated communication system designed to provide external and internal communication facilities onboard Naval ships. It extends external communication facilities to various remote users by integrating all the radio equipment and remote control units as a composite system. It provides quick and reliable communication over MF, HF, VHF and UHF bands onboard modern warships. The system is highly flexible and can be configured for all classes of ships and submarines. CCS supports Ship to Ship, Ship to Shore and Ship to Air radio communication onboard naval ships.
CCS Mk III is a new generation ATM based communication system that provide ship to ship, ship to shore and ship to air communication. It is designed as a voice and data integrated network providing connectivity between radio equipment and remote user onboard for accessing and monitoring and control of radio equipment. The system is highly flexible and can be configured for all classes of ships.
VCS Mk III is a versatile system designed to provide internal communication facilities and display of status of various equipment and systems onboard Naval ships. The system is highly flexible and re-configurable and can be configured for all classes of ships.
Very Low Frequency (VLF) is the means of long-range reliable communication from Indian mainland to distributed ships and submerged submarines.Limited bandwidth of the large transmit antenna is a major challenge in achieving enhanced information transfer rate over this link. Advanced VLF Demodulator system is a solution to this challenge which is able to achieve reliable text data communication up to 400 bps in available 200 Hz bandwidth by use of modern communication signal processing techniques. Adv VLF Demodulator is interfaced at IF of 36KHz.
Very Low Frequency (VLF) is the means of long-range reliable communication from Indian mainland to distributed ships and submerged submarines.Limited bandwidth of the large transmit antenna is a major challenge in achieving enhanced information transfer rate over this link. Advanced VLF Modulator system is a solution to this challenge which is able to achieve reliable text data communication by use of modern communication signal processing techniques.
Very Low Frequency (VLF) is the means of long-range reliable communication from Indian mainland to distributed ships and submerged submarines. Limited bandwidth of the large transmit antenna is a major challenge in achieving enhanced information transfer rate over this link. Advanced VLF Communication system is a solution to this challenge which is able to achieve reliable text data communication by use of modern communication signal processing techniques. The system has the dual capabilities of MSK Demodulation in VLF mode and HF reception in HF mode. QUALITY
Secure Multi Interface Link Encryptor (SMILE) is Bulk Encryption Unit that Secures Sensitive Data transmitted over high-speed Point-to-Point Links. SMILE has been designed to secure Bulk Data Traffic over Leased lines and Radio Relays with Data Rates up to 2 Mbps. The Data speed can easily be configured using a switch provided on the front panel. It supports synchronous Full Duplex Point to Point Secure Data communications between a full range of Network Equipments including Routers, PBX trunks,Bridges and Multiplexers. SMILE incorporates an indigenous high-grade Encryption Algorithm.
Stand Alone Communication Unit (SACU) is a rugged, compact, self contained Data Communication Terminal that provides the capability for high speed, data communication and modem concept over existing strategic and tactical communication networks.
HART (Hand held Radio Terminal) is a microprocessor based store and forward terminal that provides reliable burst transmission of messages using Forward Error Control and Data Interleaving techniques. Its burst transmission capability together with its ability to ensure reliable communication even under poor channel conditions considerably reduces the probability of interception and jamming of messages transmitted using the Equipment.
The equipment Burst Error control system for Teleprinter BEST MK II-C is a micro-prcoessor based store and forward equipment that will provide reliable burst transmission of messages using forward error control and data interleaving technique.
The equipment can be interfaced with the conventional electro-mechanical/electronic tele-printers using Baudot code or terminals using ASCITT code. Interworking compatibility exists for these terminals which are in the net.
SMART, Spurt Message Alphanumeric Radio Terminal is a Data Communication Terminal for field use. The terminal provides reliable burst transmission capability to reduce radio channel occupancy time with reduction in probability of interference and jamming.
BEACON Mk III is a compact, full duplex Crypto Device providing high grade of secrecy for DATA communication on normal Telephone Lines (using V.92 modem), T/P Network, RS-232 Network AND LAN Network (10/100 Mbps).BEACON Mk III incorporates an indigenous high-grade encryption algorithm with a very user-friendly call set-up, configuration and cryptographic key management. The encryption algorithm is configurable through the PC, providing field upgradeability. It incorporates a very robust automated crypto synchronization mechanism, which ensures reliable operation. Access control has been built into the equipment based on password protection. A LCD display and a Keypad on the front panel provides interface for configuration, key loading, network selection and status monitoring.
Secure Data Adaptor (SDA) is offline encryption / decryption equipment used along with PC / server. The SDA can be connected to PC / server through USB Port. The packet, to be encrypted is sent to SDA through USB port (Clear End) and the corresponding encrypted data packet is received by same or any other PC through USB port (Crypt End). Now this encrypted packetised data can be sent to the desired location via any communication medium Similarly the encrypted packetised data is passed on to the SDA and the corresponding decrypted data packet is received back by same or any other PC / server
It is a Bulk Encryption Unit (BEU) to support secure communication in point to point configuration at E1 interface as per ITU-T standard G.703 and V.35 interface. The selection of a particular interface is done through front panel key pad entry. It supports full duplex mode of operation.
LIVE is a Bulk Encryption Unit (BEU) to support secure communication for various data rates like 2, 34 Mbps, STM1 (155 Mbps) & STM4 (622 Mbps). The selection of a particular interface is done through front panel key pad entry. The BEU can be used as universal encryptor over satellite link /radio link/OFC link & line media.
MFTDMA Encryptor provides high-grade communication security to frame relay networks at access speeds up to 2048 kbps. It incorporates an indigenous high-grade encryption algorithm and a novel user-friendly key management. Its highly agile key generation mechanism allows the secure generation of different encryption keys for each frame.
CDMA ENCRYPTOR is a professional phone encryption software, developed on BREW platform. It protects communication against eavesdropping and interception by encrypting confidential conversation and data using strong encryption algorithms. It is an Encryptor for CDMA Handsets having BREW ver 3.1 or above. It is a software solution ported on the Mobile Handset.selection and status monitoring.
Satcom Encryptor is designed to meet the requirement of providing secure communication channel for voice/data/Fax in the SCPC DAMA Satcom network / MCPC PAMA Satcom network.
IP Encryptor is a full duplex encryption unit for deployment on an IP based data communication network providing security of IP packet. Encryption is provided on the Layer 3 of the OSI model.