3,527 Reviews Scanned
- Mid-Tower gaming PC case that supports ATX / M-ATX / Mini ITX
- Comes with 2 RGB fans on Front, 1 Non RGB Rear Fan and 6 Pin RGB Controller Hub
- Premium 4mm thick tempered glass design that ensures the durability of the window and excellent viewability.
- Driver Bays 2 x 3.5” (compatible with 2.5”) + 3 x 2.5”
- I/O Ports 2 x USB 3.2 Gen1 Type-A 1 x HD Audio / 1 x Mic-Support
- Mid-Tower gaming PC case that supports ATX / M-ATX / Mini ITX
- Comes with 2 ARGB fans on Front, 1 Non RGB Rear Fan and 6 Pin ARGB Controller Hub
- Premium 4mm thick tempered glass design that ensures the durability of the window and excellent viewability.
- Driver Bays 2 x 3.5” (compatible with 2.5”) + 3 x 2.5”
- I/O Ports 2 x USB 3.2 Gen1 Type-A 1 x HD Audio / 1 x Mic-Support
- BUDGET PC WITH EXCELLENT BUILD - X610B provides a cool gaming outlook with its front LED RGB strip. Change strip color with the Reset Key
- AIR-FLOW and HDMI SUPPORT – X610B being a budget Cabinet gives you superior quality support with an Hi-speed USB 3.0 port and two USB 2.0 ports. It also supports HD AUDIO and has 1 x 120mm normal fan pre-installed in its rear panel for air-flow and allows upto 3 X 120 mm fans on front (optional) which helps to give better cooling to all components within your system.
- NO ENTANGLED CABLES – X610B supports GPU lengths of up to 280 mm and a CPU cooler height of up to 160 mm along with a 21mm deep internal cable management system, ideal to hide all the clumsy cables within (allowing the builder to hide the internal cables, giving greater airflow)
- SHOW-OFF YOUR BUILT-IN – Unlike any other budget cabinet of this range, Chiptronex X310B provides a more luxurious effect with its fully acrylic and 4mm thick edge-to-edge transparent side panel.
- SHOW-OFF YOUR BUILT-IN – Unlike any other budget cabinet of this range, Chiptronex X610B provides a more luxurious effect with its fully acrylic and 4mm thick edge-to-edge transparent side panel.
- Black Glossy Finish, Transparent Tempered Glass Side Panel
- Fan Support : 120 mm x 3 Front, 120 mm x 2 Top, 120 mm x 2 Bottom
- Support 2 x HDD and 2 x SSD, 7 PCI Slots
- Liquid Cooler Support : 120 / 240 mm x 1 Front, 120 mm x 1 Rear
- Cable Management Support , Separate zone for Power Supply and other components
- SUPREME BUILD STRUCTURE - Chiptronex Z710 Mid Tower ATX Gaming Cabinet comes with One fixed RGB color fan in the front panel giving it a lavish outlook
- HIGH-SPEED HDMI SUPPORT: Z710 being a budget Cabinet gives you superior quality support with a Hi-speed USB 3.0 port and two USB 2.0 ports, It also supports HD AUDIO on top.
- MOTHERBOARD COMPATIBILITY: Z710 is not just a premium build budget cabinet, it also supports all standard/ big size ATX, Micro – ATX, and Mini – ITX motherboards.
- STRONG EDGE-TO-EDGE TEMPERED GLASS: It has 4mm thick edge-to-edge tempered glass on side panel which gives the case a unique outlook and various options to show off your build inside.
- TOP MOUNTED PSU: Chiptronex Z710 Gaming cabinet supports an ATX Power Supply in the top
- Black Matte Finish ,Transparent Tempered Glass Side Panel
- Support 2 x HDD and 2 x SSD, 7 PCI Slots
- Fan Support : 120 mm x 3 Front, 120 mm x 2 Top, 120 mm x 2 Bottom
- Liquid Cooler Support : 120 / 240 mm x 1 Front, 120 mm x 1 Rear
- Cable Management Support , Separate zone for Power Supply and other components
- Sunglass Case
- 1 pc Cleaning Cloth Assorted Color
- Black, Mid Tower, 416 x 210 x 452mm, Sliding Tempered Glass Side Panel
- 7 Expansion Slots, 2 x 3.5” Drive Bay, 4 x 2.5” Drive Bay
- 1 x USB 3.0, 2 x USB 2.0, 1 x Audio In, 1 x Mic, LED control button
- Pre-Installed : 3 x 120 mm ARGB Front & 1 x 120 mm ARGB Rear Fans, Fan Support : 3 x 120 mm Front, 2 x 120/140 mm Top, 1 x 120 mm Rear
- 2 x HDD, 4 x SSD, VGA Card : 360 mm, CPU Cooler Height : 160mm
- Raised Edge for both screen and camera protection.
- Made of premium Soft TPU inside and Hard Polycarbonate outside.
- Shockproof Corners for ultimate drop protection.
- Magnetic Plate allows to use it with car holder, Ring holder provides confidence and can be used as Kickstand.
- Hybrid series case compatible with Honor V10 / View 10
- Mesh Front Panel: The mesh front panel offers efficient airflow for demanding systems.
- Sliding Tempered Glass Panel: Showcase your build and system lighting effect through sliding tampered glass side panel.
- Auto-RGB Fans: All four 120mm ARGB LED fans are pre-installed to create an amazing lighting effect, you can control the RGB lighting effects directly from the I/O panel
- Excellent Thermal Performance : Optimized airflow due to the large intakes on the front panel; Additional ventilation on the top panel adds thermal support
- Expanding The Possibilities: The spacious interior fits all standing motherboard E-ATX, ATX, Micro-ATX, Mini-ITX for your gaming need.
- Product Name : 20x20 Material : Plastic;Main Color : Black0mm CPU Cooling Fan;Rated Power : DC 12V
- Material : Plastic;Main Color : Black
- This fan keeps maintain cool temperature in cabinet cases.
- For easy connection of this fan
- Connector: 2 PIN MOLEX . This is a molex connector 2 PIN
- RGB front panel with LED control button
- Black glossy finish
- Acrylic front panel
- Front LED control button
- Cable management support/separate zone for power supply and other components
- Easily Connects Your 2.5 Inch Laptop SATA HDD/SSD Hard Drive To PC, Laptop, PS4, Xbox For Data Transfer Or Expanding Storage. Support max 4TB.
- Easy Installation: Tool free installation. Plug & Play, No driver needed for this SATA enclosure. Just push out the cover, plug in the drive, close the cover and go. Hot-swap supported. No request for extra power supply.
- SuperSpeed USB3.0 with UASP - The SATA interface of the 2.5 enclosure supports UASP SATA III transmission protocol, which is 20% faster than USB3.0. The maximum data transfer rate of the USB 3.0 interface is 5Gbps. Backward compatible with USB 2.0 or 1.1 ports.
- No screw driver or tool required to open the case . Tool free easy installation
- Wide Compatibility - Windows / Lunix / Mac OS. Support WD, Seagate, Toshiba, Hitachi, Samsung, Crucial, SanDisk, Hard Drive WITH SATA Interface.
- Raised Edge for both screen and camera protection.
- Made of premium Soft TPU inside and Hard Polycarbonate outside.
- Shockproof Corners for ultimate drop protection.
- Magnetic Plate allows to use it with car holder, Ring holder provides confidence and can be used as Kickstand.
- Hybrid series case compatible with Redmi K20 Pro
- Compatible with Realme Watch 2 Pro. Offering full protection for Your Watch against Scratches, drops, and bumps.
- Hard Case with built-in screen protector prevents your watch from dust, fingerprints and scratches
- 360 degree overall protective case for Watch screen as well as the edges and side of the watch
- This protective case designed with Precise Cutouts for functional buttons and ports. Do not affected the band insertion or watch charging
- Directly charge and swap watch band, no need to remove the case.
- Hard case protector box for eyeglasses and sunglasses
- Colour: Grey
- Material: Grey Leather
- For Snglasses & Frames
- Silicone skin is compatible with Playstation 4 PS4 DualShock controllers | Protects your controller from damage due to drops, spills and normal wear and tear
- Precise cut outs provide easy access to all buttons, controls, and ports so wont effect your video game playing experience
- Non-slip design provides better grip to enhance gaming experience | Easily washable for long-lasting use
- Leaves an open spot so the touch sensitive pad is still accessible as well as all buttons including the PS button
- Package Contents: 2x Controller Skin for PS4 | Controller skin only, controller not included
- Pro Watch Back Case Cover Opener Remover Holder Adjustable Location Repair Tool Repair Tools & Kits
- 100% brand new and high quality
- Features: The item is a practical and professional watch repair tool, which is mainly made of durable metal and plastic materials, and suitable to hold large watch case up to 40mm.
- With the watch holder, you can easily open your watch back case in seconds for repairing or other uses.Portable design and easy to use, it is really a wonderful watch back case holder opener for choice.
- Help you open your watch back case easily and quickly.Simple and practical design, easy to operate. Specifications:Material: Metal+Plastic Size: 6.5m*5cm*2.5cm Main Color: Black/Gray/Blue Quantity: As Title
- hard case
- plastic case
FAQ:
Q: Which is the best gaming PC cabinet under 50000 in India?
A: Best Gaming PC Cabinets Under Rs. 5,000 in India. 1 1. Cooler Master MasterBox RGB (K501L) Gaming Cabinet Check Price. Cooler Master is known for its modern aesthetically designed PC cases all over the … 2 2. MSI MAG Forge 100M. 3 3. Antec DP501 Gaming Case: 4 4. Ant Esports Mesh Gaming Cabinet. 5 5. Antec NX 310 Gaming Case: More items
Q: What are the best PC cases for gaming?
A: So, you can go with this one if you want a gaming PC case. The net dimension of this PC case is 55.9 x 53.3 x 23.4 cm 10. Corsair Carbide 100R If you are short on the budget and want a durable PC case with all the must-have features, then you can go with this one. It is available in both black and white colors. Corsair used steel to build it.
Q: What is the best mid-tower PC case?
A: Corsair Carbide SPEC-05 gaming case comes with a modern look and high features. This mid-tower PC case has one pre-installed fan at the front panel, and users can install or add up to 6 fans in this PC cabinet. This gaming cabinet case is provided with a tempered glass side panel on its left side.
Q: Which is the Best Gaming case under 5K in India?
A: Antec DP501 Gaming Case: This is another mid-tower gaming case under 5K in India. It comes with 2 USB 3.0 ports, 1 headphone, and 1 mic jack. It has a shroud for the PSU. And, you will also find a tempered glass side panel. At the back, it comes with a free fan. But, this PC case can accommodate up to 6 fans.